my 98 mitsubishi galant auto transmission now won’t work when i put on reverse or 1-2 gears please tell what?
Question by Kenny N: my 98 mitsubishi galant auto transmission now won’t work when i put on reverse or 1-2 gears please tell what?
when i put on reverse / drive .the car won’t move at all. i see the transmision fluid leak .But when i put on the gas for maximun speed the car will move and made some noise.
Best answer:
Answer by shocked
Your tranny is shot.
either have rebuilt or get a new/rebuilt one.
What do you think? Answer below!
| Print article | This entry was posted by Hot4u on October 16, 2010 at 4:37 pm, and is filed under Auto Vehicle Types. Follow any responses to this post through RSS 2.0. You can leave a response or trackback from your own site. |
about 1 year ago
contact a mechanic… check your transmission..
about 1 year ago
So no movement unless you floor it, huh? According to my 1995 Mirage’s factory service manual (I think it’s the same F4A22 transmission, be sure to double-check that first!), it would be a defective transmission Valve Body.
Your car has the same drivetrain as a 95-99 Eclipse, so you might want to check out the shop manual for that too.
about 1 year ago
my 92 eclipse did this it was the tcu. but the leaking is what scares me because if you drove it ,and the fluid leaked badly you probably fried it.